A flush valve, by contrast, works as a straightforward seal at the base of the cistern that lifts to let water fall directly through into the pan under gravity, with no siphoning action involved, and shuts again once the float or timer mechanism allows it to reseat. Flush valves are what almost all dual-flush cisterns use, since a siphon's all-or-nothing action makes a genuine short flush difficult to achieve, whereas a valve can simply be held open for a shorter or longer period.

The second check is a knocking or banging sound, sometimes called water hammer, that happens specifically at the moment the fill valve shuts off rather than during the fill itself. This is far more often a mains pressure issue than a valve fault, caused by the sudden stop of a fast-moving column of water hitting the closed valve and sending a shock through the pipework. A fill valve replacement on its own will sometimes quieten this slightly, particularly if swapping to a bottom-entry valve which fills more gently, but it will not fully resolve a genuine water hammer problem, which usually needs an air-filled arrestor fitted at the supply if it persists.

A close-coupled cistern bolts directly onto the back of the pan with no visible pipework between the two. Because the outlet on the cistern base sits directly above the inlet on the pan, the flush valve or siphon needs a shorter outlet and often a rubber doughnut washer to seal the joint rather than a length of pipe. Fill valves on close-coupled units tend to be shorter in the body too, since there is less depth inside a compact tank.

Where brand-specific parts genuinely earn their keep is on cisterns built to a proprietary design that a universal part simply cannot replicate. Concealed cistern frames are the clearest example, since the tank dimensions, fill valve fitting and flush plate connection are often specified by the frame manufacturer and will not accept a generic part regardless of how adjustable it claims to be. Some premium close-coupled suites also use proprietary flush valve shapes or seal profiles that a standard universal valve will not seat against correctly, leading to a slow leak that only appears once the cistern is refilled and left running for a while.

Fixing centres, meaning the distance between the two mounting holes in the pan, is the measurement that actually determines whether a seat will fit at all, and it varies enough between manufacturers that assuming a standard spacing is a common source of returned parts. The two most frequently seen spacings in the UK are around 140mm to 145mm and  [[https://find-and-update.company-information.service.gov.uk/company/08612523|https://find-and-update.company-information.service.gov.uk/company/08612523]] 160mm to 165mm centre to centre, and a seat bought for the wrong spacing simply will not sit over both holes.

Cable-actuated systems use a flexible cable in place of the rigid spindle, which allows the button to be positioned somewhere other than directly above the flush valve, useful on concealed cisterns and certain close-coupled designs where the lid mechanism does not line up with the valve beneath. The cable itself can stretch, kink or seize inside its outer sheath over time, and a button that has become stiff, or one that no longer springs back after use, usually points to the cable rather than the flush valve itself.