Unterschiede

Hier werden die Unterschiede zwischen zwei Versionen gezeigt.

@@ Zeile 1: / Zeile 1: @@
+Bottom-fix hinges are the traditional arrangement, with a bolt passing down through the pan from above and a nut and washer tightened from underneath the rim. This means access is needed both above and below the pan to fit or remove the seat, which is straightforward on a floor-standing toilet but considerably more awkward on a wall-hung pan where the underside is harder to reach, or where a previous fitting has corroded the nut solid against the porcelain.
+Get the wrong flush valve on a low-level system and the flush pipe will not seat properly, leading to leaks at the joint that only show up once the cistern has been refitted and the access panel closed up again. Get a close-coupled flush valve into a low-level tank and the outlet is simply too short to reach the flush pipe collar at all.
+The practical check before assuming universal will do the job is to look at how the existing part connects, not just what it looks like. A universal valve that adjusts in length is not the same as one that adjusts in outlet diameter or seal profile, and forcing a universal outlet against a proprietary seal often produces a fit that looks correct at first glance but weeps within days.
+The practical test is simple: add a few drops of food colouring to the cistern water and wait without flushing. Colour appearing in the pan points to the flush valve or siphon. A water level that keeps rising past where it should sit points to the fill valve. Checking both takes two minutes and saves a second visit.
+A flush valve, by contrast, works as a straightforward seal at the base of the cistern that lifts to let water fall directly through into the pan under gravity, with no siphoning action involved, and shuts again once the float or timer mechanism allows it to reseat. Flush valves are what almost all dual-flush cisterns use, since a siphon's all-or-nothing action makes a genuine short flush difficult to achieve, whereas a valve can simply be held open for a shorter or longer period.
+Top-fix hinges solve exactly that access problem by using a bolt and a quick-release or turn-to-tighten fixing that can be adjusted entirely from above the pan, with no need to get underneath at all. This has made top-fix the standard choice on most new soft-close seats sold in the last several years, and it is usually the easier option to specify when the underside of the pan is difficult to reach or  [[https://www.bizratings.com/Plumb2U|via Bizratings]] when the original fixing has seized.

Editing Wiki

Benutzer-Werkzeuge

Webseiten-Werkzeuge

Unterschiede

Seiten-Werkzeuge